4.1 Intergrating Diegetic and Non-Diegetic Sound Into A Video Project

 How I have Edited and put together sound into my project

This post is an an explanation of how i edited my film project using Diegetic and Non-Diegetic sounds in my movie.  


Importing Audio

Using Youtube Mp3 Converter i used audio from a specific video, providing that the audio in the video that i have downloaded from are non-copyrighted or Royalty free.


All i had to do was to highlight and copy a video's address and paste it in the youtube converter search bard to to download the files directly into I tunes. 


Once I have done this, I opened I tunes and directly drag the sound from a folder and have made use of it in Adobe Premiere Pro CC 2019.  
Merging and separating audio files
  
I have then placed the audio underneath the video file so it can play during the film, the audio that is already included in the raw footage of the video itself will still be linked with the audio, I have separated the audio from the video by right clicking the clip and select the unlink option, which separates the video and the audio so you can edit them individually, for example: the sound for the audio file can be deleted without affecting the clip and you can replace the audio with different sounds etc.


Adjusting Audio Volume  

This short video (not mine) will demonstrate how to adjust and edit/adjust the audio volume I have used the same method to adjust the volume of my personal video as well.    

https://www.youtube.com/watch?v=705Rkd17-Gw

My completed video (YouTube Link)

This link is a full demonstration of how my video turned out after both Visual and audio editing: https://youtu.be/nKJ7Ok8kK-g


Comments

Post a Comment

Popular posts from this blog

How to set up a Tripod 1.1: How it is Used,

 A Simple guide of setting up a Tripod Step 1: Start by releasing the tripod legs, in order to do so you must extend the tripod legs, the best method of doing it is to extend from the top down rather than extending from the bottom leg section up. This will help make your tripod more stable that way. Step 2: Release each leg in turn of the height you need. It's better to extend all of the tripod legs to the maximum length rather the getting the height you need for a centre column. Note: only extend the centre column if you need to. As you place your tripod to the ground make sure that once you mount your camera (like a Canon) the leg should be pointing forward and the two side legs should be adjusted so that you will be less likely to knock the tripod during recording. Step 3: Now that you're done, you can now attach the camera to a base plate of the tripod, each tripod will include a baseplate), which clips/clamps the camera into place into the head of the plate...
Read more

Evaluation of what I did on Monday 23rd of November 2.1 Planning and Filming,

 What I previously did I have created a visual effect with a spaceship flying using green screen. There is a trick into making this effect, to make it work you will need a prop that looks like a spaceship using invisible thread. To perform the effect first you must set up your green screen, once you've done so you can then get the thread ready and cut it into any length you wish, once you are done you can then tie the tread and connect it to the spaceship, the thread will be hard to notice if the lighting isn't directly pointing to the string. I have created clips of the spaceship using a canon and recorded some clips, once I am happy with what I recorded, I started using Adobe Premiere Pro 2020 and added the clips to my project, once done I have went to google and chosen an image, the one I selected will be the background for the clip. Here is an example of what i have done:    
Read more

How to use a Camera (Canon) 1.1: How it is Used,

Using a Camera (Canon)  Step 1: To turn the camera on there is an on and off switch on the top right end above on the camera, flick the switch up if you want the camera switched on or flick the switch down if you wish to switch it off. Also take the cover off the lens so you can see what’s displayed on the screen. Step 2: look at the Icons on the top of your camera, you can twist them left or right to select different modes, though personally it’s easier if you just use the regular photo and video mode since they are simple and are one of the most common uses in many movie projects. Step 3: make sure you adjust the camera lens so it will help with focus by twisting it left or right, Behind the lenses you can twist the stick as well to help zoom in and out, or you can press the + button with the magnifying glass symbol. Press the + button a few times and it will zoom back out.  Step 4: You can press the camera icon button once if you are taking a photo, you can press the camera...
Read more